1020-Watt Roof Mount Solar Kit

Product Overview

Add all he solar power you'll ever need to your custom camper or DIY conversion van with this complete 1020-Watt Roof Mount Solar Kit from Zamp Solar.

All Zamp Panels are made in the USA and backed by a 25-year energy production guarantee, meaning you will not see a decline in the unit's performance over time!

Features:

Kit Includes:
- (x6) Monocrystalline 170 Watt Panel with Anti-Reflective Coating
- Integrated 60-Amp Weather-Resistant 5-Stage* PWM Charge Controller
- (x2) Three-Port Roof Cap
- Omni-Mount Frames with Mounting Feet and Stainless Hardware
- Remote Digital LCD Display
- Fuse Block
- Plug-and-Play Wiring Harness
  - 15 ft Lead from Controller to Roof Cap
  - 9 ft Lead from Controller to Battery Bank
  - SAE Lead from Panel to Roof Cap
Panel measures 58.3” x 26.5“ x 1.5”
Weighs 160 pounds total (24.25 pounds per panel)
1020 Watt Standard Output
56.4 Amp Standard Output
Integrated 60-Amp 5-Stage* PWM Charge Controller (limited to 56.4 Amp output)
- Real time updates of volts, amps, and amp hours.
- Dual, self-resetting circuit breakers provide peace of mind by protecting your system from overcharging.
25 Year Output Warranty
Panels Made in Bend, Oregon USA

*5 Stage Charging:

Soft Charge: When batteries suffer an over-discharge, the controller will softly ramps the battery voltage up to 10V.
Bulk Charge: Maximum-current charging until batteries rise to 85% charge.
Absorption Charge: Constant voltage charging when battery is over 85%.
Equalization Charge: *Only for WET battery or Calcium battery type.* When the battery is deeply drained below 11.5V, it will automatically run this stage to bring the internal cells to equal states and fully complement the loss of capacity. (Gel and AGM battery do not run Equalization charge)
Float Charge: Battery is safely maintained at the 100% level, holding more than 13.6 Volts.