15 Amp "Obsidian" Solar Integration Kit

Product Overview

Combine Zamp Solar's 15 Amp "Obsidian" Solar Integration Kit with Zamp Solar standard or aerodynamic "Obsidian"-series panels to create a complete solar system for your custom camper, rig, or DIY van.

The included 15-Amp 5-Stage Pulse-Width Modulation* charger regulates the energy produced by your solar panels and automatically ensures that your batteries are charged and properly maintained. Don't let poor battery management destroy your investment in batteries! The five different charging stages ensure that your battery will be properly charged at all times and levels of charge.

*5 Stage Charging:

Soft Charge: When batteries suffer an over-discharge, the controller will softly ramps the battery voltage up to 10V.
Bulk Charge: Maximum-current charging until batteries rise to 85% charge.
Absorption Charge: Constant voltage charging when battery is over 85%.
Equalization Charge: *Only for WET battery or Calcium battery type.* When the battery is deeply drained below 11.5V, it will automatically run this stage to bring the internal cells to equal states and fully complement the loss of capacity. (Gel and AGM battery do not run Equalization charge)
Float Charge: Battery is safely maintained at the 100% level, holding more than 13.6 Volts.

Features:

Kit Includes:

15-Amp Weather-Resistant 5-Stage* PWM Charge Controller
- Surface Mount
- 270 Watt Max Output
- 15 Amp Max Output
- PWM (Pulse-Width Modulation) Technology
- Float charging (leave permanently connected to battery to safely maintain full charge)
- Digital LCD Display and LED Status Lights
- Waterproof all-weather control unit
- Compatible with battery temperature sensor
Dual-Port Roof Cap (for additional panel)
Plug-and-Play Wiring Harness
- 15 ft Lead from Controller to Roof Cap
- 10 ft Fused Lead from Controller to Battery Bank