Each unit measures 24" inches in total length and adds 22.5" inches to the total vent length (see below).
Measuring Flue Length
Measure from the top of the stove to 12" above the highest point of the entire roof. This is your total required flue length.
Each section of flue will provide at least 22.5" of total finished length (some length is "lost" due to connections.)
24" stainless steel double wall flue pipe CB-3024-SS fits on both Cub and Grizzly Stoves.
Made from stainless steel inside and out. The double wall construction provides the best draft for optimal stove performance.
Outside Diameter: 3-1/4"
Inner Diameter: 2-7/8"
Without a flue shield, 9" of clearance is needed between the flue and any wall surface.
With a flue shield, only 3" of clearance is needed between the flue and shield surface.
Use self-tapping sheet metal screws to connect sections.